Personal Protective Equipment/ Safety Belts
Firefighter Safety Waist Belt FZL-YD-A
Type-17 firefighter safety waist belt built to XF 494-2023 with a 70 mm high-tenacity polyester webbing body and drop-forged aluminium alloy hardware.
Key parameters
- Standard: XF 494-2023 Type-17 unified specification, CCCF certified
- Product Category: Firefighter positioning and self-rescue belt
- Webbing: High-tenacity polyester filament, 70 plus or minus 1 mm wide, 2.8 to 3.2 mm thick
- Hardware: Drop-forged aluminium alloy (AL7075-T6) with anodised matte finish
- Buckle: Modified dual-prong insertion pin buckle with dual-row eyelets
- D-Rings: Fixed anchor D-ring plus sliding positioning D-ring with guide plate
- Design Working Load: 1.33 kN (about 135.6 kgf)
- Static Breaking Strength: 15.0 kN or above
- D-Ring Proof Load: 13.0 kN or above without permanent distortion
- Total Net Weight: 0.85 kg max
- Thermal Resistance: 204 plus or minus 5 degrees C for 5 minutes, no melting, dripping or charring
- Low-Temperature Flexibility: -35 degrees C for 24 hours, no cracking
- Flame Retardancy: Afterflame 2.0 s max, afterglow 2.0 s max
- Corrosion Resistance: 96 h neutral salt spray, NSS grade 9 or above
- Waist Girth Range: 750 mm to 1,150 mm
- Total Webbing Length: 1,250 mm plus or minus 30 mm
- Use Restriction: Work positioning, travel restraint and emergency self-rescue only; not a fall-arrest harness for vertical free fall.
Overview
Type-17 firefighter safety waist belt built to XF 494-2023 with a 70 mm high-tenacity polyester webbing body and drop-forged aluminium alloy hardware.
A fixed load-bearing D-ring and a sliding positioning D-ring with guide plate support ladder work and self-rescue; the dual-prong buckle locks through two rows of reinforced eyelets.
