Personal Protective Equipment/ Safety Belts
New-Style Firefighter Safety Belt FZL-YD-B
Safety waist belt made from 70 mm by 3 mm multi-ply polyester webbing with 6 mm solid carbon steel buckle and D-rings.
Key parameters
- Product Category: Firefighter positioning and self-rescue belt
- Webbing: High-tenacity polyester, 70 mm wide and 3 mm thick multi-ply weave
- Hardware: 6 mm solid carbon steel buckle and D-rings with electroplated finish
- Vertical Static Tensile Load: 13.0 kN or above without permanent distortion
- Design Working Load: 1.33 kN (about 135.6 kgf)
- Wearing Mass: 0.85 kg max
- Seam Back-Tack: 13 mm minimum at all joints and seam ends
- Stitching: Straight, even lines with no skipped or broken threads
- Heat Resistance: Flame and heat resistant webbing
- Environmental: Mildew-proof, moth-proof and moisture resistant
- Waist Girth Range: 750 mm to 1,150 mm
- Total Webbing Length: 1,250 mm plus or minus 30 mm
- Use Restriction: Work positioning, travel restraint and emergency self-rescue only; not a fall-arrest harness for vertical free fall.
Overview
Safety waist belt made from 70 mm by 3 mm multi-ply polyester webbing with 6 mm solid carbon steel buckle and D-rings.
Every joint carries at least 13 mm of back-tack stitching, and the webbing resists moisture, mildew and moth damage for long service in damp stations.
