WGPR-100 Wireless Ground Penetrating Radar (100 MHz)
Medium-low frequency wireless GPR balancing depth and resolution for engineering and pipeline survey.
Key parameters
- Centre frequency: 100 MHz
- Maximum detection depth (typical): 0 - 30 m
- Repeat sampling frequency: 50 kHz - 400 kHz
- Time window: 0 - 1000 ns
- Sampling points: 32 - 32768 samples per scan, selectable
- Scan rate: 1000 traces/s, settable from 1 to 1000
- Measurement modes: Point, distance, continuous and automatic cruise
- Power: 12 W
- Battery: Lithium battery 95.04 Wh, up to 8 h
- Wireless communication: 802.11b/g/n
Overview
The WGPR-100 is a medium-low frequency wireless ground penetrating radar with a 100 MHz centre frequency, balancing detection depth against resolution. It is used for engineering geological survey, underground pipeline detection, tunnel inspection and archaeological investigation. The system supports wireless acquisition and vehicle-mounted continuous scanning at up to 30 km/h, reaches an effective depth of 10 to 15 m in sand and soil, provides layered imaging with automatic profile generation, and remains reliable in wet or clay-rich media.
Effective detection depth of 10 to 15 m in sand and soil, with layered imaging and automatic profile generation.
Wireless acquisition, with vehicle-mounted continuous scanning up to 30 km/h.
Adapts well to wet, clay-rich and other difficult media.
Suitable for tunnel advance prediction, subgrade layering and void location.
For configuration, accessories and lead time, contact Clickin Industrial Co., Ltd.
