WGPR-50 Wireless Ground Penetrating Radar (50 MHz)
Low-frequency wireless GPR for deep geological survey, mineral prospecting and tunnel advance prediction.
Key parameters
- Centre frequency: 50 MHz
- Maximum detection depth (typical): 0 - 50 m
- Repeat sampling frequency: 200 kHz
- Time window: 0 - 1600 ns
- Sampling points: 32 - 32768 samples per scan, selectable
- Scan rate: 1000 traces/s, settable from 1 to 1000
- Measurement modes: Point, distance and continuous measurement
- Power: 12 W
- Battery: Lithium battery 12 V 10 Ah
- Wireless communication: 802.11b/g/n
- Dimensions / weight: 216 cm x 15 cm x 180 cm / 16 kg
Overview
The WGPR-50 is a low-frequency wireless ground penetrating radar with a 50 MHz centre frequency, an integrated host and antenna, and low power consumption. It is intended for deep geological exploration, mineral prospecting, tunnel advance prediction and the inspection of large engineering foundations. Data are transferred wirelessly, and the high penetration and interference immunity of the system keep detection stable and accurate in complex ground conditions. It runs on Windows with the GprView acquisition and processing software, which offers a bilingual interface and one-key parameter setting.
Integrated antenna and host design with low weight and low power consumption.
Wireless data transmission removes cable constraints on site.
High penetration and strong interference immunity for deep targets in complex geology.
One-key parameter setting in the GprView software for quick start-up.
Point, distance and continuous measurement modes for profile and spot work.
For configuration, accessories and lead time, contact Clickin Industrial Co., Ltd.
